SEAES K30

from €102.96
Payment currently unavailable

The Seaes K30 LED luminaire is intended for surface installation in the interior of marine vessels – for general and/or emergency lighting, suitable for small areas with low ceilings.

Voltage:
Power:
Add To Cart

The Seaes K30 LED luminaire is intended for surface installation in the interior of marine vessels – for general and/or emergency lighting, suitable for small areas with low ceilings.

The Seaes K30 LED luminaire is intended for surface installation in the interior of marine vessels – for general and/or emergency lighting, suitable for small areas with low ceilings.

• 110/240 V or 24 V

• Lumination flux: up to 3000 lm

• LED

• IP44

• Integrated rechargeable battery lasting for 3 hours

High-quality components of luminaires: powder coated body made of galvanized steel, opal globe made of impact-resistant polycarbonate, vibration-proof marine grade LED module. For use in the wheelhouse – version with adjustable brightness and the ability to switch to red light. It can be equipped with an integrated battery pack able to last for 3 hours and with a second lighting circuit.

TECHNICAL DETAILS

VOLTAGE:

• 220–240 V, 50–60 Hz
• 12–24 V, 0 Hz

POWER AND LUMINOUS FLUX:

• 1 × 8 W – 630 lm
• 1 × 16 W – 1250 lm
• 2 × 5 W – 990 lm
• 2 × 7 W – 1250 lm

COLOR TEMPERATURE:

• 4000 K; CRI > 80; MacAdam – 3

TEMPERATURE AND IP:

• 0ºC...+45ºC; IP44

LED LIFE TIME:

• 50,000 hours

BODY:

• Painted galvanized steel

LENS:

• Opal polycarbonate – OP
• Red or blue light filter – OPP

CONNECTION:

• 3 × 2.5 mm² (standard)
• 5 × 2.5 mm² (for versions with emergency lighting kit, secondary lighting circuit and for versions with brightness control)

CABLE GLANDS:

• M20 membrane grommets for Ø 6–13 mm cable

MOUNTING:

• Four mounting holes 12 × 6 mm on the rear wall of the luminaire located around the perimeter

RELATED PRODUCTS