SEAES P19
Seaes P19 LED lighting is designed for recessed installation in the interior of marine vessels - for general and/or emergency light, suitable for rooms with low ceilings.
Seaes P19 LED lighting is designed for recessed installation in the interior of marine vessels - for general and/or emergency light, suitable for rooms with low ceilings.
Seaes P19 LED lighting is designed for recessed installation in the interior of marine vessels - for general and/or emergency light, suitable for rooms with low ceilings.
• 110/240 V or 24 V
• Lumination flux: up to 5000 lm
• LED
• IP44
• Double power: 220V+24V
• Integrated rechargeable battery lasting for 3 hours
High-quality luminaire components: powder-painted housing and frame made of galvanized or stainless steel, opal or microprismatic diffusor, hight output light LED module.
For use in the cabin - version of non-magnetic materials, with dimmer and the ability to switch to red light.
It can be equipped with an integrated or external battery pack for three hours of battery life, a second lighting circuit.
TECHNICAL DETAILS
VOLTAGE:
• 220–240 V, 50–60 Hz
• 12–24 V, 0 Hz
POWER AND LUMINOUS FLUX:
• 2х11W - 1950Lm
• 2х13W - 2848Lm
• 2х17W - 4128Lm
• 4х7W - 2848Lm
COLOR TEMPERATURE:
• 4000 K; CRI > 80; MacAdam – 3
TEMPERATURE AND IP:
• 0ºC...+45ºC; IP44
LED LIFE TIME:
• 50,000 hours
BODY:
• Painted galvanized steel
• Stainless steel (optional)
OPTICS:
• Opal Polycarbonate - OP
• Microprismatic polycarbonate - MP
• Red or blue filter - OPP
• Mirror grille made of aluminum (special version)
• Steel protection grill
CONNECTION:
• 3x2.5мм² (standard)
• 5x2.5мм² (for dimming version)
CABLE GLANDS:
• Membrane entries M20 with IP66 for cable ø6-13mm
• EMC shielded cable glands M20 for cable ø6-13mm (optional)
MOUNTING:
• Four mounting holes ø7mm on the rear side
• Set of four mounting bracket
